Blog
Technical guides for workshop and plant fit-out in Saudi Arabia: equipment selection, load planning, configuration and maintenance, from published specs.
Workshop Fit-out
Multi Bay Workshop Workflow: Time Nobody Bills
Derive station count from target time per vehicle, separate short work from deep work, and treat lift and evacuation times as fixed machine time in the lane.
Operations and Maintenance
Spare Parts Availability: The Spec Never on a Spec Sheet
Parts for supplied equipment are held in stock and the rest arrives within days. What that means for your own holding, and the three published boundaries.
Paint Booths and Finishing
Booth Filter Replacement Schedule: The Cheapest Item, Left
Pre-filter, ceiling and floor filters load at different rates, and twice a year is a starting point qualified by running hours. What the pressure gauge adds.
Workshop Fit-out
Three Phase Power for Workshops: Checked Too Late
Published loads of 17 kW, 5.5 kW and 2.2 kW per motor add up in ways single ratings hide. Why some equipment trades an electrical load for a compressed air one.
Operations and Maintenance
Equipment Warranty Terms: Read It Before Something Fails
The manufacturer's warranty is the sole and exclusive one, with exclusions that include voltage fluctuation and consumables. How a claim is actually made.
Paint Booths and Finishing
Paint Booth Heat Output: Input Measured, Not What Arrives
A 200,000 kcal/h burner means little without exchanger efficiency and chamber volume. Fuel is a site constraint, and custom builds scale to 600,000 kcal/h.
Paint Booths and Finishing
Activated Carbon Filtration: Particles and Vapour Differ
Fibreglass intercepts particles, carbon adsorbs vapour, and only one of them announces when it is finished. Where carbon belongs and how it is scheduled.
AC Service Stations
Refrigerant Charging Accuracy: A Narrower Window Than Assumed
Tolerances of 10 g for gas and 5 g for oil, and why the tighter figure applies to the smaller dose. How evacuation quality decides whether a charge is precise.
Workshop Equipment and Tooling
Workshop Dust Extraction: Capture at Source, Not After
Fan pressure of 800 Pa matters more than volume alone, ductwork is part of the specification, and position beats power. Two published station forms compared.
AC Service Stations
AC Service Station Functions: Automatic Covers a Wide Range
Circuit flush and UV leak testing separate a repair station from a service one. Why recovery rate is cumulative, and who the hand-valve-free model is built for.
AC Service Stations
Refrigerant Tank Capacity: Litres and Kilograms Differ
A 12 L tank and a 10 kg cylinder describe storage differently. Why recovery rate changes the real interval, and how a heating belt affects throughput.
Vehicle Lifts and Lifting
Vehicle Lift Cycle Time: Eighty Seconds Before a Tool Is Touched
Fifty seconds up and thirty down is fixed machine time per vehicle. Where it compounds, and how the same figure works as a maintenance indicator afterwards.
A technical question about a specific machine?
Send us the dimensions and the operating conditions, and we will answer with the configuration that fits them.