Blog
Technical guides for workshop and plant fit-out in Saudi Arabia: equipment selection, load planning, configuration and maintenance, from published specs.
Trucks and RV
Caravan Paint Booth: Three Dimensions, Not One
A caravan combines the length of a long vehicle with the height of an RV in one body. How the chamber is built on all three dimensions, and where it sits.
Trucks and RV
Air Capacity Truck Surface Area: Volume Sets the Figure
A truck's surface is a multiple of a car's. Air capacity still comes from chamber volume, not vehicle type. How the figure is calculated, and why it is a pair.
Trucks and RV
Turning Radius Workshop Access: Floor Area on Paper Is Not Enough
A workshop with enough area on the drawing still cannot get the truck to the booth. Why internal space is measured by manoeuvring rather than by square metres.
Trucks and RV
Chamber Height RV Vehicles: What Sits Above the Roof
An RV needs clear height above its roof for spraying and ventilation together. The delivered range runs 2,650 to 6,000 mm, and how the final figure is fixed.
Trucks and RV
Chamber Length With Trailer: The Number Sent Short, Then Redesigned
The most repeated error in fitting out a truck workshop is sending the tractor length alone. How overall length is measured, and what it sets in the design.
Trucks and RV
Minibus Van Paint Booth: The Class That Falls Between Two Sizes
A minibus is longer than a car and shorter than a bus, so it falls outside the stock model. Where the delivered internal length starts, and what fixes it.
Paint Booths and Finishing
Choosing a Paint Booth Supplier: Seven Questions That Expose an Offer
Technical offers are compared with questions rather than prices. Seven that reveal whether a supplier built on your part or sold you a model.
Paint Booths and Finishing
Controlled Spray Environment: Three Variables Held Together
A sensitive coating needs temperature, humidity and air cleanliness held together. How it is built, and where the operating window comes from.
Auto Fleet
Logistics Fleet Paint System: Readiness Is Measured by the Queue
A logistics fleet is judged on return-to-service time rather than one vehicle's finish. Extraction for back-to-back cycles, and length for vans.
Aerospace, Marine and Rail
Mid Size Vessel Paint Booth: The Hull Exceeds Every Stock Model
Booths for ship and yacht products, built to order — that is our confirmed marine scope. The range to 24 metres long, and what we do not list.
Industrial and Manufacturing
Vehicle Assembly Plant Finishing: A Step in a Line, Not a Station
On an assembly line, finishing cycle time must match line takt or beat it. How the specification is derived from target throughput rather than from a catalogue.
Woodworking and Furniture
Joinery Product Finishing Booth: Size Follows the Largest Piece
A joinery shop runs doors, panels and fronts at different sizes daily. How the chamber is built on the largest piece, and what extraction must handle.
A technical question about a specific machine?
Send us the dimensions and the operating conditions, and we will answer with the configuration that fits them.