Blog
Technical guides for workshop and plant fit-out in Saudi Arabia: equipment selection, load planning, configuration and maintenance, from published specs.
Trucks and RV
Food Truck Body Finishing: The Body Is Built, Then Painted
A conversion workshop paints a body it built, not a standard vehicle. How chamber size is derived from the finished body, within a range reaching 24 metres.
Industrial and Manufacturing
Industrial Tank Coating Booth: Weight Decides Before Size
A tank imposes its weight on the design before it imposes its dimensions. How weight and handling enter the specification, within a range reaching 24 metres.
Trucks and RV
Bus Paint Booth: Its Numbers Differ From a Truck’s
Buses reach 16,000×6,500×4,500 mm with airflow at 72,000+72,000 m³/h and a door to 4,000×4,200 mm. The delivered figures and how to read them.
Trucks and RV
Refrigerated Trailer Refinishing: Overall Length, Not Tractor Length
The commonest error in reefer workshop fit-out is sending tractor length alone. Delivered range to 24,000 mm, and how flow is set on a flat surface.
Industrial and Manufacturing
Industrial Baking Oven: The Size That Stalls or Passes a Line
Delivered industrial baking ovens extend to 5,700×3,700×3,000 mm and above. How size is derived from the part, and why cycle time must match the line takt.
Industrial and Manufacturing
Powder Coating Curing Oven: Why the Cabin Is a Cube
Powder curing cabins start at 3,000×3,000×3,000 mm, with the heat curve set to the coating in use and provision for hanging or moving parts inside the chamber.
Military and Defense
Military Vehicle Paint Booth: Qualification Comes First
In defence procurement, qualification and documentation are settled before chamber dimensions. Delivered range to 24 metres with a powered 14,200×5,000 mm door.
Aerospace, Marine and Rail
Yacht Paint Booth: Our Confirmed Scope and Its Limits
Booths for ship and yacht products, built to order — our confirmed marine scope. The published range, and a plain statement of what we do not supply.
Aerospace, Marine and Rail
Aircraft Paint Booth: A Design Project, Not a Purchase Line
An airframe cabin is designed around the wing, not chosen from a catalogue. Published range to 24 metres, airflow to 190,000 m³/h and three-stage filtration.
Aerospace, Marine and Rail
Rail Car Paint Booth: Length Is the Number That Decides
A rail vehicle exceeds any stock booth. Delivered range runs from 16 to 24 metres with a powered door to 14,200×5,000 mm and airflow reaching 190,000 m³/h.
Workshop Equipment and Tooling
Wheel Alignment Equipment: The Angle Not Measured Returns
Thrust angle explains a pull complaint when the front axle reads correctly. Passive targets change running cost, and preparation decides every reading.
Operations and Maintenance
Equipment Acceptance Checklist: The Clock Starts on Its Own
Seven working days without written observations is conclusive acceptance of visible delivery. Risk passes before installation, and site readiness is a term.
A technical question about a specific machine?
Send us the dimensions and the operating conditions, and we will answer with the configuration that fits them.