Paint Booths & Finishing Systems · INTECH X900
INTECH X900 Paint Booth with PLC touch-screen control
The complete INTECH X700 — four-leaf glass door, 25,000+25,000 m³/h and pneumatic damper — with PLC touch-screen control over the paint, bake, temperature and time modes, and star-delta starting that eases motor start-up current. Aimed at the workshop that wants a controlled cycle repeated the same way every time.
Overview
This model at a glance
Key features
What the standard supply includes
- PLC touch-screen control over paint, bake, temperature and time
- star-delta starting for the fan motors
- four-leaf 3000×2600 mm main door with large glass panels
- 7.5 kW turbine supply fan and 7.5 kW turbine exhaust fan at 650 Pa
- pneumatic damper and a filter pressure gauge
- full-grille base of five rows, 300 mm high
- 50 mm flame-resistant EPS walls on a 0.426 mm steel skin
- argon-arc welded SUS304 heat exchanger and Riello G20 burner, 200,000 kcal/h
Engineering basis
What makes the difference in daily operation
A cycle set on the screen
The PLC touch panel holds the paint, paint-with-rising-temperature and bake modes and sets the temperature and duration of each stage, so the same cycle repeats from one operator to the next and from one shift to the next.
Star-delta starting
The two 7.5 kW motors start in star and switch to delta, which lowers the start-up current drawn from the workshop panel compared with direct-on-line starting.
Specifications
INTECH X900 specification table
| Specification | Value |
|---|---|
| Internal dimensions L×W×H (mm) | 6900×4000×2650 |
| External dimensions L×W×H (mm) | 7000×5300×3400 |
| Main door (mm) | 3000×2600 |
| Main door type | four-leaf with large glass panels |
| Work door (mm) | 800×2000 with observation glass and pressure relief above 10 Pa |
| Supply air (m³/h) | 25,000 |
| Exhaust air (m³/h) | 25,000 |
| Supply fan | turbine fan, 7.5 kW |
| Exhaust fan | turbine fan, 7.5 kW |
| Fan pressure (Pa) | 650 |
| Air speed (m/s) | 0.28 |
| Air changes per hour | 280 |
| Damper | pneumatic, switching paint and bake modes |
| Pressure gauge | round gauge in the control box showing filter loading |
| Filtration | non-woven pre-filter (above 15 μm) · high-efficiency ceiling filter (over 98% of particles above 5 μm) · EU2 fibreglass floor filter |
| Lighting | 45° LED fittings: 32 ceiling and 12 side, 20 W each, ≥800 lux |
| Heater / burner | Riello G20 diesel burner |
| Heat output (kcal/h) | 200,000 |
| Heat-up time | 5–7 minutes from 20 °C to 60 °C |
| Heat exchanger | SUS304, argon-arc welded |
| Chimney (m) | 5 |
| Wall type | 50 mm flame-resistant EPS panels, 0.426 mm steel skin |
| Base | 300 mm high, 40×80 galvanised tube · full grille (5 rows) |
| Control system | PLC with touch screen running the cycle: paint · paint with rising temperature · bake · temperature and time setting · lighting · alarm · star-delta motor starting |
| Protection | emergency stop · over-temperature, overload and phase-loss protection · Schneider relays and contactors |
| Total power (kW) | 17 |
| Voltage | 380 V 3-phase 60 Hz |
| Entry ramps (mm) | 550×2000, embossed plate |
How it differs
How the INTECH X900 differs from its nearest model
The INTECH X700 is the same booth with a standard control panel instead of the PLC, and without star-delta starting.
The INTECH X960 is the same booth with ROCKWOOL walls instead of EPS.
The 6900×4000×2650 mm chamber, the burner, the heat output and the ceiling filtration are the same across all INTECH models.
Industries
Sectors this model serves
These are the industries the INTECH X900 serves specifically, not the family as a whole.
FAQ
Common questions about the INTECH X900
What does PLC control add on the INTECH X900?
A touch screen that runs the paint, paint-with-rising-temperature and bake modes and sets the temperature and duration of each stage, so the same cycle repeats without manual adjustment each time.
What is star-delta starting for?
The motor starts in star and switches to delta, lowering the start-up current compared with direct-on-line starting.
How does the INTECH X900 differ from the INTECH X960?
Only in the wall: 50 mm EPS here, ROCKWOOL on the INTECH X960. Control, air and door are identical.
What is the air capacity of the INTECH X900 paint booth?
25,000 m³/h supply and 25,000 m³/h exhaust, from two 7.5 kW turbine fans.
What electrical supply does the INTECH X900 need?
17 kW on a 380 V, 3-phase, 60 Hz supply.
Request a quote for the INTECH X900 Paint Booth
State your sector and workshop size in the form, and you receive a quote built on the configuration that fits your site rather than a generic one.