Vehicle Lifts & Lifting Equipment · SHL-Y-J-DW4.0B
Ultrathin Mid-Rise Scissor Lift 4000 kg for Wheel-Level Work
An ultrathin scissor lift with a 600 mm lift height and 4000 kg capacity — for wheel, brake and suspension work that does not need the vehicle raised to standing height.
Overview
This model in three numbers
Key Features
What the standard supply includes
- 24 V safety circuit
- Overload protection
- Hydraulic balancing
- Japanese / Italian oil seals
- 0.4-0.6 MPa operating air
- Italian technology — per the supplier sheet
Engineering basis
What makes the difference day to day
24 V control circuit
A 24 V low-voltage control circuit limits shock risk at the operating panel — the standard treatment for equipment an operator touches with wet hands.
Overload protection
Overload protection stops the lift once rated capacity is exceeded, so the structure is never loaded beyond its design.
Specifications
SHL-Y-J-DW4.0B specification table
| Specification | Value |
|---|---|
| Lifting capacity (kg) | 4000 |
| Lift height (mm) | 600 |
| Platform (mm) | 1350 × 460 |
| Motor power (kW) | 3 |
| Voltage | 220 V 1ph 60 Hz |
| Safety circuit | 24 V |
| Operating air pressure (MPa) | 0.4–0.6 |
How it differs
How the SHL-Y-J-DW4.0B differs from its closest model
Its 600 mm lift height is the lowest in the family by a wide margin, against 1220, 1880 and 1999 mm.
Its 1350×460 mm platform is also the smallest.
This is a wheel-level working lift rather than a stand-under one, and it is the only model whose sheet lists a 24 V safety circuit, overload protection and a specified operating air pressure.
Industries
Sectors this model serves
These are the industries the SHL-Y-J-DW4.0B serves specifically, not the family as a whole.
FAQ
Frequently asked about the SHL-Y-J-DW4.0B
Why only a 600 mm lift height?
Because it is a wheel-level working lift — brakes, suspension, tires — not a stand-under lift.
What is the rated capacity?
4000 kg, on a 1350×460 mm platform.
What safety provisions are listed?
A 24 V control circuit and overload protection.
Does it need an air supply?
Yes — 0.4 to 0.6 MPa operating pressure.
Request a quote for the Ultrathin Mid-Rise Scissor Lift 4000 kg
Tell us your sector and bay size in the form, and the quote comes back built around the configuration your site needs, not a generic one.